A transparent proxy sits between clients and the Internet, acting as a gateway for the clients. It's called transparent because clients are not required to configure anything for the proxy. A transparent proxy is useful when it's not possible or desirable to modify client configurations, ant yet it's still necessary to intercept client's requests.
If you need to set up a transparent proxy on Linux, one of the easiest ways is to use Squid, an open-source proxy server software. While Squid has rich feature sets as a general web-caching proxy server, I won't explore all those features here. Here is how you configure a transparent proxy using Squid.
To install Squid on Ubuntu or Debian:
To install Squid on CentOS or RHEL:
This will install Squid version 3 (squid3) on your system, and create a default Squid configuration file in /etc/squid3. Squid is set to start automatically upon boot. To configure Squid for transparent proxy, modify its configuration file, and restart it as follows.
acl localhost src 100.100.100.0/24 ::1 http_port 3128 transparent cache_peer 100.100.100.10 parent 8000 0 no-query default cache_effective_user proxy cache_effective_group proxy
The line starting with "acl" specifies the clients which are allowed to use the proxy. In this case, those whose IP address belongs to 100.100.100.0/24 are added to the proxy's white list. The line starting with "cache_peer" is optional, and needed only when your network is behind a corporate proxy or firewall. Essentially this line declares the corporate proxy (i.e., 100.100.100.10:8000) as a "parent" proxy to connect to in order to reach any external networks.
Next, you need to set up iptables rules so that any http traffic (e.g., destined to port 80) is routed through Squid. For that, you can run the following script called proxy.sh.
#!/bin/sh # squid proxy's IP address (which is attached to eth0) SQUID_SERVER=`ifconfig eth0 | sed -ne 's/.*inet addr:\([^ ]*\).*/\1/p'` # interface connected to WAN INTERNET="eth0" # interface connected to LAN LAN_IN="eth0" # squid port SQUID_PORT="3128" # clean old firewall iptables -F iptables -X iptables -t nat -F iptables -t nat -X iptables -t mangle -F iptables -t mangle -X # load iptables modules for NAT masquerade and IP conntrack modprobe ip_conntrack modprobe ip_conntrack_ftp # define necessary redirection for incoming http traffic (e.g., 80) iptables -t nat -A PREROUTING -i $LAN_IN -p tcp --dport 80 -j REDIRECT --to-port $SQUID_PORT # forward locally generated http traffic to Squid iptables -t nat -A OUTPUT -p tcp --dport 80 -m owner --uid-owner proxy -j ACCEPT iptables -t nat -A OUTPUT -p tcp --dport 80 -j REDIRECT --to-ports $SQUID_PORT # forward the rest of non-http traffic iptables --table nat --append POSTROUTING --out-interface $INTERNET -j MASQUERADE iptables --append FORWARD --in-interface $INTERNET -j ACCEPT # enable IP forwarding for proxy echo 1 > /proc/sys/net/ipv4/ip_forward
Once you have set up iptables rules using this script, you can save the current iptables rules permanently, so that you don't need to re-run the script.
Finally, those clients who wish to use the transparent proxy should specify the IP address of the transparent proxy as their default gateway.
Subscribe to Xmodulo
You can have daily Linux tutorials and FAQs delivered to your email inbox. Simply enter your email address below to subscribe to our mailing list. You will receive hands-on guides and carefully written tutorials related to Linux, everything for free.